Phoenix Gold Speaker ATc8 User Manual download pdf

Congratulations on your purchase of the Phoenix Gold IH

ATC Series In-Ceiling Speaker System. This product

is designed to reproduce the audio portion of your

home entertainment environment with accuracy and

detail that will satisfy the most discriminating listener.

Please read this Installation Manual to ensure the

proper installation and performance of your ATC

Series speakers.

Preparing for your Installation

Gather the necessary tools for your installation.

You will need the following tools:

1) A Keyhole or Drywall Saw

2) A Phillips Screwdriver

3) Masking Tape

4) A Pencil

5) A Tape Measure

6) A Stud Finder (recommended)

7) Your ATC Series speakers

Placement

Plan your speaker placement carefully. Make certain

that electrical, plumbing and any other services will not

interfere within the ceiling where you plan to install your

speakers. The ATC Series speakers can be mounted in

walls, but are typically used in ceilings. The speakers

should be located so that they provide even coverage

at your listening position. The distance between the

speakers should not be greater than the distance from

the speakers to the listening position (See Figure 1).

If the room’s dimensions or furniture placement prevent

adhering to this requirement, the tweeters in the ATC

Series speakers can be swiveled to aim them at the

desired listening position.

New Construction

If you are installing your speakers in new construction

before the finished walls go up, Phoenix Gold Innovative

Home offers New Construction Brackets, which provide

a stable frame that can be fastened to the wall studs or

ceiling joists on 16” or 24” centers. This allows the

sheet rock or other surface covering to be installed

and provides a template to cut the opening for the

ATC Series speakers.

ATc8

Use a stud finder to locate the joists behind the ceiling

surface. Also, you should now check for obstructions

like cross bracing in front of and behind the desired

speaker location.

8” 2-Way In-Ceiling Speakers

11’

16’

20’

11.5’

Figure 1

Existing Construction

In most modern buildings ceiling joists are positioned

on 16” centers, providing a space between the studs of

approximately 14 3/8”. The specifications chart shows

the appropriate cut out sizes (p. 4). Additionally, you

should allow an extra 3/4” in all directions behind the

ceiling surface to allow room for the screw clamps that

mount the speaker to the ceiling to swing into position.

INNOVATIVE HOME

1 2 3 4

Summary of Contents

Page 1 - INNOVATIVE HOME

Congratulations on your purchase of the Phoenix Gold IH ATC Series In-Ceiling Speaker System. This product is designed to reproduce the audio portion

Page 2 - Installing the Speakers

After selecting the mounting location, mark the hole to be cut out. A template is provided in the speaker box. Locate and align the template, then mar

Page 3 - Aiming the Tweeter

3Tighten all four of the mounting screws in the same manner until the speaker is properly aligned and held tight to the ceiling surface.Painting the S

Page 4 - Specifications

4ATc8SpecificationsWooferTweeterFrequency ResponseImpedanceSensitivityPower CapacityOuter DimensionCut Out DimensionMounting depth8” Mica Filled Poly

Comments to this Manuals

No comments

Phoenix Gold Speaker ATc8 User Manual

Browse online or download User Manual for Car speakers Phoenix Gold Speaker ATc8. Phoenix Gold Speaker ATc8 User's Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Car speakers Phoenix Gold Speaker ATc8